ZOJE ZJ5821 - Confirm Pattern under Test Feed Mode

5. Basic Operating Instruction
Parameter
Code
Content Range
Default
Unit
Value
S39 Pattern Copy 1 OFF OFF~P01~P20
g
1：No Bar-tacking
2：Taper Bar-tacking
3：Linear Bar-tacking S40
T
y
pe of Bar-tackin
4： g
dia
l Hole
1 2
Round Bar-tackin
5：Ra
S41 Double Sewing
0：Forbid
1：Permit
1 0
S42 Adjustment of Round Head -0.5~0.8 0.1 0
S45
tment of Stitch Form at
Joint
-0.2~0.8 0.05 0
Adjus
5-4 Confirm Pattern under Test Feed Mode
tween needle and presser.
① Press Test Key
Test Feed Mode is that only cloth-feeding
board works normally when the upper shaft
keeps still. This mode is used to confirm the
positional relation be
Press
to display the stitch form (1),
pattern code (2), total stitch number (3) and
leftover stitch number (4) in t
display area.
he pattern data
… P20
C1→ th
② Select the Pattern Code
The pattern code will change in the
following sequence: P01 → P02 → →
C2…C9…P01 at pressing e
. (Press
to reverse this sequence.)
27