7. Interface of Parameter Setting Mode
7-5 Communication Function
The communication mode contains the following functions:
1、 Update Panel Software via U Disk；
2、 Transfer U Level Parameters between Panel and U disk
7-5-1 Operation Penal Update
① Have ac
cess to the interface of
communication function
Insert U disk, in Level 2 of Setting Mode,
press
to have access to the communication
function mode (as shown in the right figure).
：Software Update
② Enter Software Update Interface
Press
to enter the software update
interface (as shown in right), where user can
update the software
The updating software is located at
「update」in U disk. Click the content for update,
then please press
.
44
To Next Page
Loading...
