10. Appendix 1
10. Appendix 1
10-1. Hint List
No. Name
Content
M-001 Set value too large
Please input value within range
M-002 Set value too small
Please input value within range
M-003 Parameter save error
Press Enter to recover default setting
M-004 Communication error
Communication error between operation panel
and control box
M-005 Operation head not match to control box
Please check the model and the software
version
M-006 Clock error
The hardware clock is down, please contact
manufacturer for repair
M-007 Wrong password
Input again
M-008 Wrong user ID
Input again
M-009 Fail to confirm password
Input password again
M-010 Can not change system time
Periodical password has been set, can not
change system time
M-011 Password file input error
M-012 Password file load error
M-013 Password save successful
M-014 Clear all password failed
Can not delete password file
M-015 Fail to clear password
After clearance of password, the input of file
has problem
M-016 Password file is deleted without authorization
Password file is deleted without authorization,
please turn off machine
M-017 Can not input blank
Input password again
M-018 Current password not match
Input current password again
M-019 New password not match
Input new password again
M-020
Periodical password is same to super
password error
Input password again
M-021 Enter touching panel correction mode
Are You Sure？Yes：enter No：X
M-022 Correction successful
Correction is successful, please restart machine
M-023 Correction failed
Please perform correction again
M-024 SRAM initialization
Clear all the data within SRAM, please turn off
machine and restore the DIP switch
M-025 Turning off
M-026 No warning record
M-027 Clear warning record
Are You Sure？Yes：enter No：X
90
To Next Page
Loading...
