EasyManuals Logo

ZOLL AEV User Manual

ZOLL AEV
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
906-0731-01-05 Rev. C ZOLL Ventilator Operator’s Guide 5-29
Vt Limit Backup Setting Conflict
Popup triggers during CPAP or BL mode when the user attempts to set the Vt limit < the Vt low limit in the
Apnea Backup settings.
Message: Cannot adjust high limit lower than Backup Vt Setting
Vt Limit Conflict
Popup triggers when the user attempts to set the Vt high limit < the Vt setting.
Message: Cannot adjust high limit lower than Vt Setting
High Vt Limit Setting
Popup triggers when the user attempts to set the Vt limit >1500 ml. Doing this could, in effect, disable the
alarm for some patients. To do this, the user must press the Accept button and then continue to set a value
>1500 ml followed by Accept again to confirm the setting change.
Message: Confirmation required -- press accept key for values above 1500ml
Vt Limit Conflict
Popup triggers when the user attempts to set the Vt low limit < Vt high limit.
Message: Cannot adjust low limit higher than high limit
Vt Limit Conflict
Popup triggers during SIMV (V) when the user attempts to set the Vt low limit > the current Vt.
Message: Cannot adjust low limit higher than Vt Setting
High Pressure Limit Setting
Popup triggers when the user attempts to set the PIP > 60 cm H
2
O. To do this, the user must press the
Accept button and then continue to set a PIP >60 cm H
2
O followed by Accept again to confirm the setting
change.
Message: Confirmation required -- press accept key to exceed 60 cmH2O
PIP Limit Conflict
Popup triggers when the user attempts to set the PIP High limit > the PIP Low limit.
Message: Cannot adjust high limit lower than low limit
PIP Limit Backup Setting Conflict
Popup triggers during CPAP or BL mode when the user attempts to set the PIP High limit < Apnea Backup
PIP limit.
Message: Cannot adjust high limit lower than backup PIP target
PIP Limit Conflict
Popup triggers when the user attempts to set the PIP High limit < the PIP Low limit.
Message: Cannot adjust high limit lower than PIP target
PIP Limit Conflict
Popup triggers when the user attempts to set the PIP High limit < the combination of PS and PEEP pres-
sures.
Message: Cannot adjust high limit lower than PS + PEEP
PIP Limit Conflict
Popup triggers when the user attempts to set the PIP Low limit > the PIP high limit.
Message: Cannot adjust low limit higher than high limit
Heart Rate Limit Conflict
Popup triggers when the user attempts to set the HR High limit < the HR Low limit.
Message: Cannot adjust high limit lower than low limit
Heart Rate Limit Conflict
Popup triggers when the user attempts to set the HR Low limit > the HR High limit.
Message: Cannot adjust low limit higher than high limit

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZOLL AEV and is the answer not in the manual?

ZOLL AEV Specifications

General IconGeneral
BrandZOLL
ModelAEV
CategoryFan
LanguageEnglish

Related product manuals