SETTING UP THE ZOLL VENTILATOR
3-6 www.zoll.com 906-0731-01-05 Rev. C
Connecting the Power Supply
Connect the external power cable to the ventilator as follows:
Connecting and Disconnecting the Power Supply
Caution Do not twist the power cable connection plug. Pinch the plug and slide up to release the safety
latches. Failure to do so may damage the power connection plug and prevent it from functioning.
Warning! If the power supply, power cable, or power connection plugs are damaged or become
damaged during use, immediately disconnect the power cable from external power and
the power supply assembly.
Power Supply Latching
To Next Page
Loading...
