MAINTENANCE
7-2 www.zoll.com 906-0731-01-05 Rev. C
Configuration and firmware information appears on the display screen after powering on the
device. Additional device information is available through the Main Menu (select Unit Info),
including the unit’s calibration date. The ZOLL Ventilator operates on an annual preventative
maintenance cycle, and the device issues a low priority alarm to remind you when calibration is
due.
Cleaning
Keep the ventilator and its accessories clean at all times. Never allow grease or oil to enter the
system or coat its components.
Clean the unit at regular intervals and maintain up-to-date records of inspections, cleaning, and
maintenance.
Take care to prevent liquids from entering the ventilator. Never submerge the ventilator and
avoid using excessive amounts of water that might enter the unit. Dry all exposed parts
following usage in wet environments.
Clean the unit’s housing and hose connections with a damp, soapy cloth.
For general decontamination and cleaning, apply a 10% bleach solution with a damp cloth.
Do not clean the unit with abrasives or chlorinated hydrocarbon cleansers, which damage the
housing and interface lens.
After cleaning, thoroughly dry the unit with a lint-free cloth. Make sure that all exposed
surfaces are cleaned and dried.
Warning! Never use oil or grease of any kind with oxygen or compressed gas equipment.
To Next Page
Loading...
Need help?
General
