906-0731-01-05 Rev. C ZOLL Ventilator Operator’s Guide 6-7
Using the ZOLL Ventilator in an MRI Environment
You can use ZOLL’s MRI-compliant EMV+
®
and Eagle II
™
ventilators in an
MRI environment while securely mounted to the ZOLL MRI Roll Stand (
REF 816-0731-01)
with the Aluminum IV Support Arm (
REF 820-0124-00).
To securely mount the ventilator, tighten the knob on the back plate of the roll stand to hold the
ventilator in position, then lock the roll stand wheels (we also recommend that you tether the
rolling stand in place):
731 Series Ventilator Mounted On MRI Rolling Stand With IV Support Arm
Before using the ventilator in an MRI environment, it is important that you read and understand
all warnings in the “Ferromagnetic Equipment” Section of Chapter 1.
To Next Page
Loading...
