906-0731-01-05 Rev. C ZOLL Ventilator Operator’s Guide 3-11
9. Change Parameter Values
If the patient requires parameter values that differ from the default values, you can use the
parameter buttons to change these values, as necessary. To change the parameter values, press
the Parameter buttons to display the primary parameter and secondary parameter values, or
Press and hold the parameter button to display the parameter’s context menu. Use the selection
dial to adjust the highlighted parameter. Press the Accept/Select button to implement the
change.
10. Change Ventilator Settings
The Menu button displays the Main Menu, which allows you to change various Ventilator
settings, such as the contrast or brightness of the unit’s Display Screen (LCD Contrast/LCD
Brightness).
When you press the Menu button, the Main Menu appears:
• Alarm Config
• Powerup Settings
• LCD Contrast
• LCD Brightness
• GMT Offset
• Unit Info
• Alarm History
To Next Page
Loading...
