Zoom G2 FOUR User Manual

Setting the recording time
The recording time for the loop can be set.
1. Turn on the Looper Effect Setting Screen (→ Setting the looper effect).
Setting Explanation
MANUAL Recording will continue until stopped manually or the maximum
recording time is reached.
♩×1–64 This sets the value to 1 – 64 quarter notes. The actual recording time
depends on the BPM (tempo) setting (→Adjusting the tempo).
The recording time (seconds) = 60 ÷ BPM × quarter notes.
When the set recording time is reached, recording will stop and loop
playback will start.
NOTE:
• The setting options include MANUAL and 1 – 64 quarter notes.
• The looper recording time is 1.5 – 40 seconds (20 when UNDO is ON) for stereo, and 1.5 – 80 seconds (40
when UNDO is ON) for mono. To switch between stereo and mono, see “Setting the looper effect”.
• Settings that would exceed the maximum recording time will be adjusted automatically.
• Changing the recording time will delete the recorded data.
67

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)