Zoom G2 FOUR User Manual

5. Turn to adjust the looper effect settings.
See the reference links for details about the settings.
❶
Loop recording time
The recording time for the loop can be set. (→Setting the recording time)
❷
Undo function setting
This turns on/off the undo function that can be used to undo the last recorded overdub of a loop.
(→Setting the UNDO function)
❸
Stop mode
This sets how the looper behaves when loop playback is stopped. (→ Setting the stop mode)
❹
Volume
This adjusts the looper volume. (→ Adjusting the volume)
66

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)