Zoom H6 - Using Recording Features

Recording
Basic recording
23
H6 Handy Recorder
2. Turn for the selected
input to adjust the input
level.
HINT
•
Adjust so that the peak level stays around −12dB.
•
You can change the recording format. (→P.81)
•
You can cut noise from wind and other sources during
recording. (→P.74)
3. Press
to start
recording.
4. Press
to add a mark.
5. Press to pause.
NOTE
When recording is paused, a mark is added at that point.
6. Press
to stop recording.
NOTE
•
A maximum of 99 marks can be added to a single project.
•
During recording if the file size exceeds 2 GB a new file
will be created automatically in the same project and
recording will continue without pause. When this hap-
pens, numbers will be added to the ends of the file names:
“-0001” for the first file, “-0002” for the second file and so
on.