Zoom H6 - Overdubbing and Project Editing; Adding Overdubs to Existing Projects

Recording
Overdubbing
31
H6 Handy Recorder
Overdubbing
1. Press .
2. Use
to select
“PROJECT MENU”,
and press
.
3. Use
to select
“Overdub”,
and press
.
4. Press the track button
until the indicator lights
red for the track to be
overdubbed.
5. Turn to adjust the input level.
HINT
You can also adjust the mixer (volume/pan), low cut filter
and compressor/limiter as needed.
6. To monitor already recorded tracks, press their track
buttons so their indicators light green.
NEXT
You can add recordings to an already recorded project.
WAV format only