USB functions
Audio interface settings
68
Audio interface settings (continued)
Mixing the inputs
You can adjust the mix of the inputs. The results of this mix
are input to a computer or iPad. When in stereo mix mode,
the resulting stereo mix is sent.
1. Press
.
2. Use
to select
“INPUT&OUTPUT”,
and press
.
3. Use
to
select “Mixer”,
and press
.
4. Change the parameter
settings as desired.
■Mixing controls
Move cursor/change value: Move
up/down
Select parameter to change: Press
5. Press to listen to
the project without mixer
adjustments.
Pressing this button turns the
mixer settings on and off.
HINT
The same mix settings are saved and used for both stereo
mix and multi track modes.
To Next Page
Loading...
