Other functions
Adjusting the input signal monitoring mix
76
1. Press .
2. Use
to select
“INPUT&OUTPUT”,
and press
.
3. Use
to select
“Monitor Mixer”,
and press
.
4. Change parameters as
desired.
■ Mixing controls
Move cursor/change value: Move
up/down
Select parameter to change: Press
You can adjust the level and panning of each input signal for the monitoring mix.
Parameter Setting range Explanation
Volume
Mute, −48.0 – +12dB
(in 0.5dB increments)
Adjusts track volume
Panning L100 – CENTER – R100
Adjusts left–right
position of sound.
NOTE
•
The use of volume and panning settings only affect the
monitoring signal. They do not affect the recorded data.
•
Use the Project Mixer to adjust the balance during play-
back. (→P.42)
5. Press
to listen to
the project without mixer
adjustments.
Pressing this button turns the
mixer settings on and off.
NOTE
These mix settings are saved with each recorded project
separately. Mix settings can also be applied during play-
back. (→P.42)
Adjusting the input signal monitoring mix
To Next Page
Loading...
