Zoom H6 - Page 47

To Next Page

To Previous Page

Checking/editing projects/ﬁles

Changing project names

H6 Handy Recorder

Main Page

Introduction2
Table of Contents3
Contents3
Names of Parts4
MIC Overview6
XY MIC6
MS MIC6
Connecting and Disconnecting Mics7
MIC Connection7
MIC Disconnection7
Connecting Mics/Other Devices to Inputs 1-48
Connecting Mics8
Connecting Instruments/Other Devices8
Stereo Inputs8
Connection Examples9
Display Overview10
Home/Recording Screen10
Playback Screen11
Supplying Power12
Using Batteries12
Using an AC Adapter13
Loading an SD Card14
Turning the Power on and off15
Turning the Power on15
Turning the Power off15
Using the Hold Function16
Activating the Hold Function16
Deactivating the Hold Function16
Setting the Language17
Setting the Date and Time18
Setting the Type of Battery Used19
Recording Process20
Folder and File Structure21
Basic Recording22
Selecting the Folder Where Projects Are Saved24
Recording Automatically25
Pre-Recording27
Counting in before Recording28
Adjusting the Side MIC Level29
Backup Recording30
Overdubbing31
Playback34
Basic Playback34
Select the Playback Project from the List36
Changing the Playback Speed37
Repeat Playback of a Set Interval (AB Repeat)38
Changing the Playback Mode40
Changing the Playback Pitch (Key)41
Mixing42
Checking Project Information44
Checking Track Marks45
Changing Project Names46
Mixing down a Project48
Normalizing Tracks50
Dividing Projects52
Trimming Project Beginnings and Ends54
Deleting One Project56
Deleting All Projects in a Folder57
Rebuilding a Project58
Recording a Project Voice Memo59
Playing Backup Files60
Data Exchange with Computers (Card Reader)62
Using as an Audio Interface64
Audio Interface Settings66
Making Direct Monitoring Settings66
Using Loop Back (in Stereo MIX Mode)67
Mixing the Inputs68
Using the Tuner70
Using the Metronome72
Reducing Noise (Low Cut Filter)74
Using the Input Compressor/Limiter75
Adjusting the Input Signal Monitoring MIX76
Monitoring the Input Signals of Specified Tracks (solo Mode)77
Monitoring MS-RAW Signals78
Converting MS Format Input Signals to Ordinary Stereo79
Setting the Recording Format81
Changing Automatic Recording Settings82
Enabling Automatic Stopping83
Outputting Tone Signals When Starting and Stopping Recording (Sound Marker Function)84
Lowering the Line Output Level85
Setting How Projects Are Named86
Changing the Phantom Power Setting87
Using Plug-In Power88
Using VU Meters to Check Input Levels89
Setting the Display to Save Power90
Adjusting the Display Brightness91
Checking the Firmware Versions92
Restoring the Default Settings93
Checking SD Card Open Space94
Formatting SD Cards95
Testing SD Card Performance96
Updating the Firmware98
Using SD Cards from Older H Series Recorders99
Using a Remote Control100
Troubleshooting101
Specifications102

Zoom H6 - Page 47

Table of Contents

Other manuals for Zoom H6

Related product manuals