Other functions
Testing SD card performance
97
H6 Handy Recorder
Test progress
Card access rate
AVE: average
MAX: maximum
7. Start a full test.
This will test all writable areas on the card.
Pause/resume test: Press
Cancel test: Press
8. The test completes.
The result of the evaluation will
be shown.
If the access rate MAX reaches
100%, the card will fail (NG).
NOTE
Even if a performance test result is "OK", there is no guar-
antee that writing errors will not occur. This information is
just to provide guidance.
To Next Page
Loading...
