Loading WAV files as regions
WAV files on SD cards and USB flash drives can be loaded into projects.
NOTE:
Files with the following formats can be loaded.
• WAV files: Either 44.1kHz/16-bit or 44.1kHz/24-bit according to the project setting
1. Copy the files that you want to load onto the SD card or USB flash drive in advance.
• When loading from an SD card: Put the files in the “AUDIO” folder on the SD card. (→ SD card folder
and file structure)
• When loading from a USB flash drive: Put the files in the “ZOOM_R20” > “AUDIO” folder on the USB
flash drive. (→ USB flash drive folder and file structure)
2. On the Track View Screen, move the playback header to the position where you want to load the file.
3. Double-tap part of an audio track that has no regions.
The Option Menu will open at the top of the screen.
82
To Next Page
Loading...
