Zte Axon - Pair with Another Bluetooth Device

59
Pair With another Bluetooth Device
1. Touch the Home key > > Settings > Bluetooth.
2. Slide the Bluetooth switch to the On position if
Bluetooth is off.
Your phone automatically scans for and displays the
IDs of all available Bluetooth devices in range. Touch
> Refresh to scan again.
3. Touch the device to pair with.
4. Confirm that the Bluetooth passkeys are the same
between the two devices and touch PAIR. Alternately,
type a Bluetooth passkey and touch PAIR.
When the other device accepts the connection or enters
the same passkey, pairing is successfully.
NOTE: Some devices require that the Bluetooth passkey
be fixed for certain devices, such as headsets and
hands-free car kits. Try entering the most common
passkeys: 0000 or 1234 or refer to the documents
for that device.
Forget or Unpair with a Bluetooth Device
These steps make the phone forget its pairing connection
with another Bluetooth device. To connect to the device
again, you must search it and type or confirm a passkey
again.
1. Touch the Home key > > Settings > Bluetooth and
ensure that Bluetooth is turned on.