5 Configure the Local Network
Figure 5-18 Routing Table Page
3. Click Refresh to refresh the information.
Configure Static Routing
4. Click Static Routing to the configuration page and then click the Create New Item,
see Figure 5-19.
Figure 5-19 Static Routing Page
5. Configure the static routing parameters.Table 5-14 lists the static routing parameters.
Table 5-14 Parameter Descriptions for the Static Routing
Parameter Description
Name The name of static routing entry.
Egress WAN connection for static routing.
Network Address IPv4 address of the destination network.
Subnet Mask Subnet mask of the destination network.
Gateway The next-hop IPv4 address to the destination network.
6. Click Apply button to apply the changes.
Configure Policy Routing
SJ-20210621164956-009 | 2021-12-07(R1.0) 57
To Next Page
Loading...
