H3140 Maintenance Management Guide
7. Click Policy Routing to the configuration page and then click the Create New Item,
see Figure 5-20.
Figure 5-20 Policy Routing Page
8. Configure the policy routing parameters. Table 5-15 lists the policy routing parame-
ters.
Table 5-15 Parameter Descriptions for the Policy Routing
Parameter Description
Name The name of Policy routing entry.
Egress WAN connection for policy routing
Source IP Address Source IPv4 address of the matching packets.
Source Mask Source mask of the matching packets.
Destination IP Address Destination IPv4 address of the matching packets.
Destination Mask Destination mask of the matching packets.
Protocol Matching IPv4 protocol. The ANY option means any IPv4 proto-
col.
Source Port Source port number of the matching packets.
Destination Port Destination port number of the matching packets.
Source MAC Address MAC address of the source device that sends the matching
packets.
58 SJ-20210621164956-009 | 2021-12-07(R1.0)