Confidential and Proprietary Information of ZTE CORPORATION 35
device to connect to the network.
Max Wi-Fi Devices: Touch / next to Max Wi-Fi to set the maximum number
of the devices that can connect to the device simultaneously, these connections are
shared between the device’s Main and Guest Wi-Fi networks. Touch to adjust
the number of connections available for the Main or Guest Wi-Fi networks.
Wi-Fi Band: Select the desired frequency for your device.
Wi-Fi Range: Select the range for your device.
Wi-Fi Sleep Mode: Select the length of time for your Wi-Fi signal broadcast to remain
active if no devices are connected.
Settings
Touch to configure basic device settings.
Allow Mobile Data: Slide the switch next to Standard Data to turn on or off mobile
data.
Data Roaming: Slide the switch next to Data Roaming to turn on or off data roaming.
Data usage: Check how much data has been used or set mobile usage limit and
warning. See Data Usage.
Display
Screen Brightness: Set the brightness of the touch screen as you need.
Display Timeout: Set the length of time of inactivity before the screen turns off
automatically.
Wi-Fi Info on Home Screen: Set whether Wi-Fi information should be displayed
on the home screen.
Lock Screen (PIN): Disable the screen lock or enable it with PIN.
Software Update: Check, download and install the system updates.
Factory Reset: Touch Factory Reset > Reset device to reset the device to its factory
To Next Page
Loading...
