EasyManua.ls Logo

Zte ZXHN H3600 - Page 30

Zte ZXHN H3600
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZXHN H3600 Maintenance Management Guide
Figure 5-7 New 3G Connection
4. Set the parameters and click Apply. For a description of the parameters, refer to Ta-
ble 5-3.
Table 5-3 New 3G Connection parameters
Parameter Description
Connection Name Name the 3G connection. For example "3G”.
PDP Type There are two PDP types:
IP
PPP
APN Set the communication standard of the access network to
be used.
For example ”3gnet”.
Dial Number Dial Number.
Different communication standards have different dial num-
bers.
For example ”*99#”.
MTU Define the maximum transfer unit.
Username/Password The Username/Password of new 3G connection.
Authentication Type There are three authentication types:
Auto
PAP
CHAP
Connection Mode There are two connection modes:
Always On
24 SJ-20201203151144-003 | 2021-06-16(R1.0)

Table of Contents

Related product manuals