6 Configure the Local Network
Parameter Description
Mixed(802.11b/g/n)
Mixed(802.11b/g/n/ax)
Band Width Radio frequency bandwidth, including Auto,20Mhz and 40Mhz.
SGI Click On to enable SGI function.
Click Off to disable SGI function.
Beacon Interval Interval for transmitting beacon frames, default: 100 ms.
Beacon frames are used for communicating with other AP devices or
network control devices to announce the WLAN presence.
Transmitting Power Level of radio signal transmitting power. A larger value indicates wider
coverage. Options:100%, 80%, 60%, 40%, 20%.
3. Click Apply button to apply the changes.
Note
WLAN global configuration(5GHz) refers to WLAN global configuration(2.4GHz).
Configure the Private WLAN SSID
1. Click Private WLAN SSID Configuration to the configuration page, see Figure 6-4.
Figure 6-4 Private WLAN SSID Configuration Page
2. Table 6-3 lists the WLAN SSID configuration parameters.
Table 6-3 Parameter Descriptions for the WLAN SSID Configuration
Parameter Description
SSID Name The name of SSID.
SJ-20201203151144-003 | 2021-06-16(R1.0) 51
To Next Page
Loading...
