Zultys MG4 Series User Manual

MG Series Gateway Setup Manual ver 306.X (0000000272)
Revision 20 Jul. 12, 11
© 2011 Zultys, Inc. No reproduction of distribution without permission
Page 30 of 42
Technical Publications
 Outpulsing Delay: 600
 Busy|Repeat: 30 (allow at least 30 cycles of busy tone for outgoing call
before disconnecting the line)*
 The rest as defaults
Title
Explanation
Gain to IP
Set the voice volume gain towards IP side, the default is 0. Taking
decibel as the unit, setting range is -3 ~ +9 decibels. -3 means declining
of 3 decibels; +3 denote the amplification of 3 decibels.
Gain to PSTN
Set the voice volume gain towards PSTN side, the default is -3. Taking
decibel as the unit, setting range is -6 ~ +9 decibels.
Impedance
Set the parameter of FXO line impedance, with the default of 600
ohm. The optional settings as below:
 Complex
 600（ohm）

Zultys MG4 Series Specifications

General

Brand	Zultys
Model	MG4 Series
Category	Gateway
Language	English