Zybio EXI1820 - Page 100

Software System Operation
１００
Parameters
Meaning
Operation
LIS IP
IP address of LIS server
Click the input
LIS port
IP port of LIS server
Click the input
LIS
communication
timeout (S)
The LIS communication
timeout will alarm after 5s
No operation required
Connection LIS
server
automatically
Automatically connect to
LIS server after
Click to check
Real-time
transmission of
results
Real-time transmits sample
results by LIS server
No operation required
LIS
communication
item settings
The current number of all
items of the analyzer on the
LIS
No operation required
Item name
Name of test items of your
analyzer
No operation required
Item ID
Item ID on LIS server
Click item and enter item number on
the LIS service device.
Save
Save the item No. on the
LIS server
Click
Basic operations
Click [Save] after entering various information in the LIS related setting boxes.
4.8.4.Department settings
The department settings include the department list settings and the addition and
deletion of departments, as shown in the figure below.