1) Support additional sample tests during daily maintenance;
2) It is not allowed to suspend the test when adding the first test,
otherwise the test item may be invalid;
3) Remove the check box for automatic regular maintenance, and
regular maintenance will not be performed.
4.8.2.3.Results of customized samples/items.
The result display customization function is used to set the sample and result
display options in the result interface for easier viewing of test results.
The display content of sample list and results list can be respectively set in [Today’s
Results], [All Results] and [Retest Results] interface.
◼ When check by samples, it is allowed to customize the display information of the
sample list and result list;
◼ When check by items, it is allowed to customize the display information of the result
list.
Basic operations
1) [System Setting] - [Analyzer Setting]- [Results of customized samples/items];
2) Enter the customized sample result interface;
3) If checked by samples:
Select the column name and interface to be displayed in [Sample List], and click [Move
Up] or [Move Down] to adjust the display order of column names;
To disable the display of a column name, uncheck the corresponding checkbox;
Select the column name and interface to be displayed in [Sample Results List], and
click [Move Up] or [Move Down] to adjust the display order of column names;
To disable the display of a column name, uncheck the corresponding checkbox;
4) If checked by items:
Select the column name and interface to be displayed in [Project Results List], and
click [Move Up] or [Move Down] to adjust the display order of column names;
To disable the display of a column name, uncheck the corresponding checkbox;
5) Click [Save] to customized result field display;
6) Click [Exit] to exit the customized result field interface.
To Next Page