Chapter 3 Repeater Mode
WAP6806 User’s Guide
19
Figure 6 Status: Repeater Mode
The following table describes the labels shown in the Status screen.
Table 4 Status Screen: Repeater Mode
LABEL DESCRIPTION
System Information
Host Name This is the WAP6806’s model name.
System Mode This is the device mode (Section 2.1.1 on page 15) to which the WAP6806 is set - Repeater
Mode.
Hardware Version This displays the hardware version of the device.
Firmware Version This displays the firmware version and the date created.
System Up Time This displays the total time the WAP6806 has been on.
Current Date/Time This displays the WAP6806’s present date and time.
Ethernet Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
Encapsulation mode This shows the protocol for encapsulating packages the WAP6806 uses.
Gateway This shows the gateway of the WAP6806.
DNS Server This shows the IP address of the DNS Server.
To Next Page
Loading...
