Chapter 14 Maintenance
WAP6806 User’s Guide
82
14.5.3 Restore to Factory Defaults
Click Reset to clear all user-entered configuration information and returns the WAP6806 to its
factory defaults.
You can also press the Reset button on the rear panel to reset the factory defaults of your
WAP6806.
14.6 Reboot
System reboot allows you to restart the WAP6806 without turning the power off. Click
Maintenance > Reboot to open the following screen.
Figure 68 Maintenance > Reboot
Click Restart to have the WAP6806 reboot. This does not affect the WAP6806’s configuration.
To Next Page
Loading...
