ZyXEL Communications ARMOR X1 - 6.3 Resetting the WAP6806

Chapter 6 The Web Configurator
WAP6806 User’s Guide
32
The following table describes the labels in this screen.
6.3 Resetting the WAP6806
If you forget your password or IP address, or you cannot access the Web Configurator, use the
Reset button to reboot the WAP6806. See Section 1.5 on page 12 for more details.
Table 9 Change Password Screen
LABEL DESCRIPTION
New Password Type a new password.
Confirm Password Retype the password for confirmation.
Change Click Change to save your changes back to the WAP6806.
Skip Click Skip if you do not want to change the password this time.