ZyXEL Communications ARMOR X1 - 7.5 Configuring the WAP6806 to Repeater Mode

Chapter 7 Connection Wizard
WAP6806 User’s Guide
38
The following screen appears if the key verifies successfully.
Figure 23 Wireless Network Configuration Complete
You can click Expert to go to the Status screen.
7.5 Configuring the WAP6806 to Repeater Mode
In wireless client mode, your WAP6806 can act as an access point and wireless client at the same
time. Select Repeater Mode in the eaZy 123 Setup screen. The wizard scans for available
networks as shown in the following screen.
Figure 24 Wizard Scanning for Wireless Network
1 Select an available 2.4G Wi-Fi network from the Wi-Fi Network list, as shown in the following
screen.