ZyXEL Communications ARMOR X1 - Client Mode Setup; Repeater Mode Setup

Chapter 10 Operation Mode
WAP6806 User’s Guide
53
10.3.1 Client Mode Setup
Click Configuration > Operation Mode > Operation Mode Setup and then select Client Mode.
Figure 39 Configuration > Operation Mode > Operation Mode Setup
The following table describes the labels in this screen.
10.3.2 Repeater Mode Setup
Click Configuration > Operation Mode > Operation Mode Setup and then select Repeater
Mode.
Figure 40 Configuration > Operation Mode > Operation Mode Setup
Confirm Click Confirm to save your changes.
Reset Click Reset to begin configuring this screen afresh.
Table 18 Configuration > Operation Mode > Operation Mode Setup
LABEL DESCRIPTION
Table 19 Configuration > Operation Mode > Operation Mode Setup
LABEL DESCRIPTION
Operating Band Select the operating band you want to use.
Confirm Click Confirm to save your changes.
Reset Click Reset to begin configuring this screen afresh.