ZyXEL Communications ARMOR X1 - 10.4 AP Connection

Chapter 10 Operation Mode
WAP6806 User’s Guide
55
10.3.2.2 Ranging Mode
In Ranging mode, the 2.4 GHz band is supported on the Up behavior, while the 2.4 GHz and 5 GHz
bands are supported on the Up behavior.
Figure 42 Repeater Mode: Ranging Mode
10.3.2.3 Speed Mode
In speed mode, the 5 GHz band is supported on the Up behavior, while the 2.4 GHz and 5 GHz
bands are supported on the Up behavior.
Figure 43 Repeater Mode: Speed Mode
10.4 AP Connection
Use this screen to configure the AP connection settings. Click Configuration > Operation Mode >
AP Connection.
Note: AP Connection screens are not available when the WAP6806 is in AP mode.
Universal
Repeater
Client
2.4 GHz
Up
5 GHz
Down
2.4 GHz/5 GHz
Universal
Repeater
Client
5 GHz
Up
2.4 GHz
Down
2.4 GHz/5 GHz