ZyXEL Communications ARMOR X1 - Chapter 11 Ethernet; 11.1 Overview; 11.2 What You Can Do; 11.3 LAN Setup Screen

WAP6806 User’s Guide
60
CHAPTER 11
Ethernet
11.1 Overview
This chapter describes how to configure LAN settings.
11.2 What You Can Do
•Use the LAN Setup screen (Section 11.3 on page 60) to change the IP address for your
WAP6806.
•Use the IP Alias screen (Section 11.4 on page 61) to have the WAP6806 apply IP alias to create
LAN subnets.
11.3 LAN Setup Screen
This screen allows you to assign the WAP6806 a fixed or dynamic management IP address. The
default IP address of the WAP6806 in repeater mode is 192.168.1.2. Alternatively, you can connect
to the WAP6806 using the default domain name, http://zyxelsetup.
Use this screen to change the WAP6806’s management IP address. Click Configuration >
Network > Ethernet > LAN Setup.
Figure 47 Configuration > Network > Ethernet > LAN Setup