Chapter 14 Maintenance
WAP6806 User’s Guide
80
Figure 63 Firmware Upgrading
The WAP6806 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 64 Network Temporarily Disconnected
After the WAP6806 restarts, the Upgrade Accomplished screen appears.
Figure 65 Upgrade Accomplished
Refresh the web page and log in again and check your new firmware version in the Status screen.
14.5 Backup / Restore Screen
Click Maintenance > Backup/Restore. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
To Next Page
Loading...
