Chapter 1 Introduction
WAP6806 User’s Guide
13
3 Press the RESET button for longer than five seconds to set the WAP6806 back to its factory-default
configuration.
1.6 2-way Installation
The WAP6806 can be used for 2-way installation: vertical and wall mounted.
1.6.1 Stand
To have your WAP6806 as a stand-alone device, put you WAP6806 vertically into the stand as
shown below.
1.6.2 Wall Mounting
The following are the dimensions of a screw anchor and M3 tap screw used for wall mounting. All
measurements are in millimeters (mm).
To Next Page
Loading...
