ZyXEL Communications ARMOR X1 - Chapter 13 Management; 13.1 Overview; 13.2 What You Can Do; 13.3 MCL Screen

WAP6806 User’s Guide
74
CHAPTER 13
Management
13.1 Overview
This chapter provides information on the Management screens.
13.2 What You Can Do
•Use the MCL screen (Section 13.3 on page 74) to enable or disable services access to the
WAP6806.
•Use the One Connect screen (Section 13.4 on page 75) to enable or disable the One Connect
configuration.
13.3 MCL Screen
Use this screen to enable or disable services access to the WAP6806. Click Configuration >
Management > MCL. The following screen displays.
Figure 58 Configuration > Management > MCL
The following table describes the labels in this screen.
Table 31 Maintenance > General
LABEL DESCRIPTION
Service Control List
# This is the index number of the service.
Service Name This displays the service name.
Enable Select Enable to allow the service to access the WAP6806.
Apply Click Apply to save your changes.