Chapter 12 Wireless LAN
WAP6806 User’s Guide
69
12.7 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN and check current WPS status.
To open this screen, click Configuration > Network > Wireless LAN (2.4G/5G) > WPS tab.
Figure 55 Configuration > Network > Wireless LAN (2.4G/5G) > WPS
The following table describes the labels in this screen.
Table 30 Network > Wireless LAN (2.4G/5G) > WPS
LABEL DESCRIPTION
WPS Setup
WPS Select this to enable or disable the WPS feature.
Confirm Click Confirm to save your changes.
WPS Setup
Configured This displays Yes when the WAP6806 has connected to a wireless network using WPS or
when Enable is selected.
WPS SSID This displays the network name for the WPS connection.
WPS Auth Mode This displays the security protocol selected for the WPS connection.
WPS Encryption
Type
This displays the type of wireless encryption employed by the access point to which you
want to connect.
Note: This is for Wireless LAN 2.4G only.
PIN Code This displays the previous PIN number the system generated.
Generate New
PIN
Click Generate New PIN to have the WAP6806 generate a PIN number.
To Next Page
Loading...
