Chapter 14 Maintenance
WAP6806 User’s Guide
78
14.4 Firmware Upgrade Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a “*.bin”
extension, e.g., “WAP6806.bin”. The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upgrade
firmware to your WAP6806.
Figure 62 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Time Zone Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
Daylight Saving
Daylight
Saving
Daylight saving is a period from late spring to fall when many countries set their clocks ahead
of normal local time by one hour to give more daytime light in the evening.
Select Enable if you use Daylight Saving Time.
Start Day Configure the date when Daylight Saving Time starts.
End Day Configure the date when Daylight Saving Time ends.
Confirm Click Confirm to save your changes.
Reset Click Reset to reload the previous configuration for this screen.
Table 34 Maintenance > System > Time Setting (continued)
LABEL DESCRIPTION
Table 35 Maintenance > Firmware Upgrade
LABEL DESCRIPTION
Firmware Upgrade
Choose File Click Choose File to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Online Firmware Upgrade
To Next Page
Loading...
