Chapter 3 Repeater Mode
WAP6806 User’s Guide
22
WPS Encryption
Type
This displays the type of wireless encryption employed by the access point to which you
want to connect.
PIN Code This displays the previous PIN number the system generated.
Generate New
PIN
Click Generate New PIN to have the WAP6806 generate a PIN number.
Release
Configuration
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the WAP6806.
WPS Progress
WPS Mode Select whether the WAP6806 performs wireless security information synchronization using
the PIN configuration method or the Push Button Configuration (PBC) method.
PIN Code Type the same PIN number generated in the wireless station’s utility.
Confirm Click Confirm to save your changes.
WPS Status
Status This displays the current WPS process.
Idle - It means there is no active WPS.
Start WSC Process - The WPS is activated to set up a wireless network.
WPS Succeeded - The client is successfully connected with an AP.
WSC Failed - The client fails to connect with an AP.
Progress This is an indication bar displaying the WPS connecting progress.
Table 5 Repeater: Configuration > Network > Wireless LAN (2.4G / 5G) > WPS (continued)
LABEL DESCRIPTION
To Next Page
Loading...
