Chapter 5 Client Mode
WAP6806 User’s Guide
29
The following table describes the labels shown in the Status screen.
Table 7 Status Screen: Client Mode
LABEL DESCRIPTION
Device Information
Host Name This is the WAP6806’s model name.
System Mode This is the device mode (Section 2.1.1 on page 15) to which the WAP6806 is set - Client
Mode.
Hardware Version This displays the hardware version of the device.
Firmware Version This displays the firmware version and the date created.
System Up Time This displays the total time the WAP6806 has been on.
Current Date/Time This displays the WAP6806’s present date and time.
Ethernet Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
Subnet Mask This shows the LAN port’s subnet mask.
Encapsulation Mode This shows the protocol for encapsulating packets the WAP6806 uses.
Gateway This shows the gateway of the WAP6806.
DNS Server This shows the IP address of the DNS Server.
IP Alias This shows the IP address of the WAP6806.
Subnet Mask This shows the subnet mask of the WAP6806.
AP Connection Status - 2.4G / 5G
MAC Address This shows the wireless adapter MAC Address of the root AP.
SSID This shows a descriptive name used to identify the root AP in the wireless LAN.
Channel This shows the channel number which you select manually or the root AP automatically
scans and selects.
Security This shows the level of wireless security the root AP is using.
Status This shows the current status of the Wireless LAN.
To Next Page
Loading...
