ZyXEL Communications ATP800 - Cellular Status Screen

Chapter 6 Monitor
ZyWALL ATP Series User’s Guide
129
Figure 105 Monitor > System Status > IP/MAC Binding
The following table describes the labels in this screen.
6.10 Cellular Status Screen
This screen displays your mobile broadband connection status. Click Monitor > System Status > Cellular
Status to display this screen.
Figure 106 Monitor > System Status > Cellular Status
Table 35 Monitor > System Status > IP/MAC Binding
LABEL DESCRIPTION
Interface Select a Zyxel Device interface that has IP/MAC binding enabled to show to which
devices it has assigned an IP address.
# This field is a sequential value, and it is not associated with a specific IP/MAC binding
entry.
IP Address This is the IP address that the Zyxel Device assigned to a device.
Host Name This field displays the name used to identify this device on the network (the computer
name). The Zyxel Device learns these from the DHCP client requests.
MAC Address This field displays the MAC address to which the IP address is currently assigned.
Last Access This is when the device last established a session with the Zyxel Device through this
interface.
Description This field displays the description of the IP/MAC binding.
Refresh Click this button to update the information in the screen.