ZyXEL Communications ATP800 - Using Upnp in Windows XP Example

Chapter 15 UPnP
ZyWALL ATP Series User’s Guide
357
15.4.2 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP installed
in Windows XP and UPnP activated on the Zyxel Device.
Make sure the computer is connected to a LAN port of the Zyxel Device. Turn on your computer and the
Zyxel Device.
15.4.2.1 Auto-discover Your UPnP-enabled Network Device
1 Click start and Control Panel. Double-click Network Connections. An icon displays under Internet
Gateway.
2 Right-click the icon and select Properties.
Figure 242 Network Connections
3 In the Internet Connection Properties window, click Settings to see the port mappings there were
automatically created.
Figure 243 Internet Connection Properties
4 You may edit or delete the port mappings or click Add to manually add port mappings.