Chapter 34 Object
ZyWALL ATP Series User’s Guide
636
The Year, Month, and Day columns are not used in recurring schedules and are disabled in this screen.
The following table describes the remaining labels in this screen.
34.8.3 The Schedule Group Screen
The Schedule Group screen provides a summary of all groups of schedules in the Zyxel Device. To
access this screen, click Configuration > Object > Schedule >Group.
Figure 416 Configuration > Object > Schedule > Schedule Group
The following table describes the fields in the above screen.
Table 271 Configuration > Object > Schedule > Edit (Recurring)
LABEL DESCRIPTION
Configuration
Name Type the name used to refer to the recurring schedule. You may use 1-31 alphanumeric
characters, underscores(
_), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
Date Time
StartTime Specify the hour and minute when the schedule begins each day.
• Hour - 0 - 23
• Minute - 0 - 59
StopTime Specify the hour and minute when the schedule ends each day.
• Hour - 0 - 23
• Minute - 0 - 59
Weekly
Week Days Select each day of the week the recurring schedule is effective.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.
Table 272 Configuration > Object > Schedule > Schedule Group
LABEL DESCRIPTION
Configuration
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s
settings.
Remove
To remove an entry, select it and click Remove. The Zyxel Device confirms you want
to remove it before doing so.
References Select an entry and click References to open a screen that shows which settings use
the entry.
# This field is a sequential value, and it is not associated with a specific schedule.
To Next Page
Loading...
