ZyXEL Communications ATP800 - Notification > SMS

Chapter 37 System
ZyWALL ATP Series User’s Guide
742
37.14 Notification > SMS
The Zyxel Device supports Short Message Service (SMS) to send short text messages to mobile phone
devices. At the time of writing, the Zyxel Device uses ViaNett as the SMS gateway to help forward SMS
messages. You must already have a ViaNett account in order to use the SMS service.
Click Configuration > System > Notification > SMS to open the following screen.
Figure 507 Configuration > System > Notification > SMS
The following table describes the labels in this screen.
Table 327 Configuration > System > Notification > SMS
LABEL DESCRIPTION
General Settings
Enable SMS Select the check box to turn on the SMS service.
Default country
code for phone
number
Enter the default country code for the mobile phone number to which you want to send SMS
messages.
ViaNett
Configuration
User Name Enter the user name for your ViaNett account.
Password Type the Password associated with the user name.
Retype to
Confirm
Type your password again for confirmation.
Apply Click this button to save your changes to the Zyxel Device.
Reset Click this button to return the screen to its last-saved settings.