Chapter 34 Object
ZyWALL ATP Series User’s Guide
619
34.5.2 Add/Edit ZyMesh Profile
This screen allows you to create a new ZyMesh profile or edit an existing one. To access this screen, click
the Add button or select and existing profile and click the Edit button.
Figure 401 Configuration > Object > ZyMesh Profile > Add/Edit ZyMesh Profile
The following table describes the labels in this screen.
34.6 Address/Geo IP Overview
Address objects can represent a single IP address or a range of IP addresses. Address groups are
composed of address objects and other address groups.
• The Address screen (Section 34.6.2 on page 620) provides a summary of all addresses in the Zyxel
Device. Use the Address Add/Edit screen to create a new address or edit an existing one.
• Use the Address Group summary screen (Section 34.6.3 on page 624) and the Address Group Add/
Edit screen, to maintain address groups in the Zyxel Device.
• Use the Geo IP screen (Section 34.6.4 on page 626) to update the database of country-to-IP address
mappings and to manually configure country-to-IP address mappings.
Profile Name This field indicates the name assigned to the profile.
ZyMesh SSID This field shows the SSID specified in this ZyMesh profile.
Table 255 Configuration > Object > ZyMesh Profile (continued)
LABEL DESCRIPTION
Table 256 Configuration > Object > ZyMesh Profile > Add/Edit ZyMesh Profile
LABEL DESCRIPTION
Profile Name Enter up to 31 alphanumeric characters for the profile name.
ZyMesh SSID Enter the SSID with which you want the managed AP to connect to a root AP or repeater to
build a ZyMesh link.
Note: The ZyMesh SSID is hidden in the outgoing beacon frame so a wireless
device cannot obtain the SSID through scanning using a site survey tool.
Pre-Shared Key Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hexadecimal characters.
The key is used to encrypt the wireless traffic between the APs.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
