Chapter 38 Log and Report
ZyWALL ATP Series User’s Guide
757
38.3.4 Edit Remote Server Log Settings
The Log Settings Edit screen controls the detailed settings for each log in the remote server (syslog). Go
to the Log Settings Summary screen (see Section 38.3.1 on page 751), and click a remote server Edit
icon.
Figure 522 Configuration > Log & Report > Log Setting > Edit (Remote Server - AC)
Log Category This field displays each category of messages. The Default category includes debugging
messages generated by open source software.
Selection Select what information you want to log from each Log Category (except All Logs; see below).
Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this category
enable normal logs and debug logs (yellow check mark) - log regular information, alerts, and
debugging information from this category
OK Click this to save your changes and return to the previous screen.
Cancel Click this to return to the previous screen without saving your changes.
Table 336 Configuration > Log & Report > Log Setting > Edit (USB Storage) (continued)
LABEL DESCRIPTION
To Next Page
Loading...
