Chapter 38 Log and Report
ZyWALL ATP Series User’s Guide
751
38.3 Log Setting Screens
The Log Setting screens control log messages and alerts. A log message stores the information for
viewing or regular emailing later, and an alert is emailed immediately. Usually, alerts are used for events
that require more serious attention, such as system errors and attacks.
The Zyxel Device provides a system log and supports email profiles and remote syslog servers. View the
system log in the MONITOR > Log screen. Use the email profiles to mail log messages to the specific
destinations. You can also have the Zyxel Device store system logs on a connected USB storage device.
The other four logs are stored on specified syslog servers.
The Log Setting screens control what information the Zyxel Device saves in each log. You can also
specify which log messages to email for the system log, and where and how often to email them. These
screens also set for which events to generate alerts and where to email the alerts.
The first Log Setting screen provides a settings summary. Use the Edit screens to configure settings such as
log categories, email addresses, and server names for any log. Use the Log Category Settings screen to
edit what information is included in the system log, USB storage, email profiles, and remote servers.
38.3.1 Log Setting Summary
To access this screen, click Configuration > Log & Report > Log Setting.
Mail To Type the email address (or addresses) to which the outgoing email is delivered.
Send Report Now Click this button to have the Zyxel Device send the daily email report immediately.
Report Items Select the information to include in the report. Types of information include System Resource
Usage, Wireless Report, Interface Traffic Statistics and DHCP Table.
Select Reset counters after sending report successfully if you only want to see statistics for a 24
hour period.
Reset All Counters Click this to discard all report data and start all of the counters over at zero.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 333 Configuration > Log & Report > Email Daily Report (continued)
LABEL DESCRIPTION
To Next Page
Loading...
