ZyXEL Communications ATP800 - Chapter 1 Introduction; Introduction; Overview; Registration at Myzyxel

ZyWALL ATP Series User’s Guide
24
CHAPTER 1
Introduction
1.1 Overview
Zyxel Device refers to these models as outlined below.
• ATP200
• ATP500
• ATP800
Most screen shots in this guide come from the ATP200.
The following table describes the port features of the Zyxel Device by model.
• ATP500 and ATP800 support Device HA Pro.
• Some interface names vary by model - see Table 13 on page 69 and Table 14 on page 69 for default
port / interface name mapping. See Table 15 on page 69 for default interface / zone mapping.
See the product’s datasheet for detailed information on a specific model.
1.2 Registration at myZyxel
myZyxel is Zyxel’s online services center where you can register your Zyxel Device and manage
subscription services available for your Zyxel Device (see Configuration > Licensing > Registration >
Service for services available for your Zyxel Device).
• For Zyxel Devices that already have firmware version 4.25 or later, you have to register your Zyxel
Device and activate the corresponding service at myZyxel (through your Zyxel Device).
• For Zyxel Devices upgrading to firmware version 4.25 or later, you may skip registering your Zyxel
Device and activating the corresponding service at myZyxel (through your Zyxel Device). However, it
is highly recommended to at least register your Zyxel Device. At the time of writing, the Firmware
Upgrade license providing Cloud Helper new firmware notifications, is free when you register your
Zyxel Device.
Table 1 ATP Series Comparison Table
ATP MODELS ATP200 ATP500 ATP800
USB 3.0 Ports 2 2 2
1 Gbps SFP interface 1 1 2
10/100/1000 Mbps Ethernet WAN Ports 2 - -
10/100/1000 Mbps Ethernet Ports 4 7 12
Console Port 1 1 1