ZyXEL Communications ATP800 - AP Information: Single AP

Chapter 6 Monitor
ZyWALL ATP Series User’s Guide
150
6.18 AP Information: Single AP
Use this screen to view wireless traffic usage and wireless stations for a managed AP. Click Monitor >
Wireless > AP Information > Single AP to display the Single AP screen.
Figure 118 Monitor > Wireless > AP Information > Single AP
The following table describes the labels in this screen.
Table 49 Monitor > Wireless > AP Information > Single AP
LABEL DESCRIPTION
AP Selection Select a managed AP from the drop-down list box to view its wireless traffic usage
and wireless stations.
Usage by Select the measure unit in GB or MB to display the graph.
Traffic Usage This graph displays the overall traffic information about the AP you specified for the
preceding 24 hours.
y-axis The y-axis represents the amount of traffic in megabytes/gigabytes.
x-axis The x-axis represents the time over which wireless traffic flows transmitting from/to
the AP.
Station Count This graph displays information about all the wireless stations that have connected
to the AP for the preceding 24 hours.
y-axis The y-axis represents the number of connected wireless stations.
x-axis The x-axis represents the time over which a wireless client was connected.
Refresh
Click Refresh to update this screen.