ZyXEL Communications ATP800 - Page 177

Chapter 6 Monitor
ZyWALL ATP Series User’s Guide
177
Figure 145 Monitor > Log > View AP Log
The following table describes the labels in this screen.
Table 70 Monitor > Log > View AP Log
LABEL DESCRIPTION
Show Filter Click this button to show or hide the filter settings.
If the filter settings are hidden, the Display, Email Log Now, Refresh, and Clear fields are
available.
If the filter settings are shown, the Display, Priority, Source Address, Destination Address,
Source Interface, Destination Interface, Service, Keyword, Protocol, and Search fields
are available.
Select an AP Click the pull down menu to choose an AP.
Query Click Query to create a Query log.
Log Query Status The field displays the
AP Information This field displays the AP information. N/A is displayed when
Log File Status This field displays how many logs are available. It will display Empty if there’s none.
Last Log Query Time This field displays the most recent time a log query was solicited.
Display Select the category of log message(s) you want to view. You can also view All Logs at
one time, or you can view the Debug Log.
Priority This displays when you show the filter. Select the priority of log messages to display. The
log displays the log messages with this priority or higher. Choices are: any, emerg, alert,
crit, error, warn, notice, and info, from highest priority to lowest priority. This field is read-
only if the Category is Debug Log.
Source Address Type the IP address of the source AP.
Destination Address This displays when you show the filter. Type the IP address of the destination of the
incoming packet when the log message was generated. Do not include the port in this
filter.
Source Interface This displays when you show the filter. Type the source interface of the incoming packet
that generated the log message.
Destination Interface This displays when you show the filter. Type the interface of the destination of the
incoming packet when the log message was generated.
Service Select a policy service available from
Zyxel Device from the pull down menu.
Keyword Type a keyword of the policy service available from Zyxel Device to search for a log.
Protocol Select the protocol of the AP from the pull down menu.